Versions Compared

Old Version 6

changes.mady.by.user Maximilian Loy

Saved on

compared with

New Version 7

changes.mady.by.user Maximilian Loy

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

  • PU_MSG: 1|1@87|2@138

  • Resulting AT command: AT%TEST=*1234,230*(12,1|1@87|2@138)#\r\n

  • Resulting AT repsonse after tracker receipt: OK\r\n

  • Resulting AT response after tracker could send to the cloud: Send OK\r\n

Example 2

Send powunity20:

  • PU_MSG: powunity20

  • PU_MSG_LEN: 10

  • Resulting AT command: AT%TEST=*1234,230*(10,powunity20)#\r\n

  • Resulting AT repsonse after tracker receipt: OK\r\n

  • Resulting AT response after tracker could send to the cloud: Send OK\r\n

Sending the data via a serial terminal (left side of picture). The message can be seen on traccar.powunity.com in the Input tracker attribute:

...

Info

...

The tracker state will change with the next message sent by the tracker. The Input field will be gone then.

You can still view old Input values using Report → Position in the lower section. Make sure to enable the Input column by clicking on the down error in the report columns.